2-wire zc102c smoke detector compatible with all conventional fire alarm control panel
Dual LEDs-two LEDs blink standby,provide 360degree visibility
Unique optical sensing chamber-Engineered to sense smoke by a wide range of combustion sources.
Unpolarized wire input-to prevent the likelihood of wiring errors.
General Description
The device is photoelectronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel.
Two LEDs on each detector provide local 360degree visible alarm indication. they flash every 3~5seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. the detector can be reset only by a momentary power interruption.
Technical Specifications
System voltage: 24VDC(9~28VDC)
Standby current:120uA@24VDC
Alarm current:20mA@24VDC
Operating temperature range: -10C to 50C
Operating humidity range: 10% to 93% relative humidity.Noncondensing
Latching Alarm: Reset by momentary power interruption
Size:99x99x48mm
Weight:155g
Installation Guidelines
All wiring must be installed in compliance with the National Electrical code,applicable state and local codes,and any special requirements of the local Authority having jurisdiction.
